Video Tutorials
In this episode we sketch the hub design to be used to bolt our end caps to our main frame
In this episode we sketch the hub design to be used to bolt our end caps to our main frame.
We will add final touches to electric motor design and add the remaining bolts to our finished design.
6:07
We sketch out a complex sketch using Copy and cut away the fan pattern on the end cap.
4:05
In this lesson we will mirror the front cap and bolts to create the back cap.
4:13
We will create the C hook using Sweep and will Translate it into the C hook mount.
3:29
In this lesson we will create the C hook mounts.
4:46
In this lesson we will learn the Union command to combine bodies.
1:26
We will create the screws, insert them into the motor and make copies using Transform/Translate.
4:53
We will create the main shaft and will transform it into the motor frame.
3:18
We will learn about section views and how they can be used within Shapr3D.
2:06
We create the terminal cap and discuss the difference between using push to extrude and standard extrude tool.
3:33
We will learn replace face when trying to extrude our sketch up until the revolve surface.
2:47
In this episode we will create and mirror the legs of the electric motor.
5:46
We will sketch the fin, extrude it and copy to generate all fins around the main frame
4:33
5:34
Once completed the main sketch, we revolve each of the 3 sketches to generate 3 unique bodies
3:09
The main sketch will be a revolved sketch for the motor frame and end caps
5:06