Video Tutorials

Episode 1 | Main Sketch

The main sketch will be a revolved sketch for the motor frame and end caps

The main sketch will be a revolved sketch for the motor frame and end caps. This will generate 3 unique bodies. In this lesson we complete the end cap sketch main frame and the front cap.

All videos on Electric Engine

Episode 16 | Fitting screws

We will add final touches to electric motor design and add the remaining bolts to our finished design.

6:07

Episode 15 | Fan Pattern

We sketch out a complex sketch using Copy and cut away the fan pattern on the end cap.

4:05

Episode 14 | Mirror the Front Cap

In this lesson we will mirror the front cap and bolts to create the back cap.

4:13

Episode 13 | C Hook

We will create the C hook using Sweep and will Translate it into the C hook mount.

3:29

Episode 12 | C Hook Mount

In this lesson we will create the C hook mounts.

4:46

Episode 11 | Union to Combine the Frame

In this lesson we will learn the Union command to combine bodies.

1:26

Episode 10 | Screws

We will create the screws, insert them into the motor and make copies using Transform/Translate.

4:53

Episode 9 | Main Shaft

We will create the main shaft and will transform it into the motor frame.

3:18

Episode 8 | Section Views

We will learn about section views and how they can be used within Shapr3D.

2:06

Episode 7 | Terminal Cap

We create the terminal cap and discuss the difference between using push to extrude and standard extrude tool.

3:33

Episode 6 | Terminal Box

We will learn replace face when trying to extrude our sketch up until the revolve surface.

2:47

Episode 5 | Creating the Legs

In this episode we will create and mirror the legs of the electric motor.

5:46

Episode 4 | Creating the Fins

We will sketch the fin, extrude it and copy to generate all fins around the main frame

4:33

Episode 3 | Hubs

In this episode we sketch the hub design to be used to bolt our end caps to our main frame

5:34

Episode 2 | Revolving

Once completed the main sketch, we revolve each of the 3 sketches to generate 3 unique bodies

3:09

Episode 1 | Main Sketch

The main sketch will be a revolved sketch for the motor frame and end caps

5:06